Tungsten Carbide Burrs
 |
RexLee’s Burs are made of tungsten, have 3mm, 6mm diameter shanks and are approximately 38mm~150mm long. They are used primarily with the strait handpieces of flexible shaft machines. The wide variety of shapes and sizes offered is intended to fill the complete needs of anyone with requirement for high quality precision burs. Used for shaping, smoothing and removing hardened steel, stainless steels, fired ceramic, plastics, hardwoods and more. |
ØD3mm Shank Diameter / 38mm Overall Length
 |
||||||||
| Model No. | SA-41M | SA-42M | SA-43M | SB-43M | SC-41M | SC-42M | SD-41M | SD-42M |
| ØD | 1.5 | 2.5 | 3.0 | 3.0 | 2.5 | 3.0 | 2.5 | 3.0 |
| T | 6 | 11 | 14 | 14 | 14 | 14 | 2.5 | 3.0 |
| L | 38 | 38 | 38 | 38 | 38 | 38 | 38 | 38 |
 |
|||||||
| Model No. | SE-41M | SF-41M | SF-42M | SG-41M | SG-43M | SG-44M | SH-41M |
| ØD | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 |
| T | 5.5 | 6.0 | 12.0 | 6.0 | 10.0 | 12.0 | 6.0 |
| L | 38 | 38 | 38 | 38 | 38 | 38 | 38 |
 |
|||||||
| Model No. | SL-41M | SL-42M | SM-41M | SM-42M | SM-43M | SN-41M | SN-42M |
| ØD | 3.0 | 3.0 | 3.0 | 3.0 | 3.0 | 2.5 | 3.0 |
| T | 5.5 | 12.0 | 8.7 | 11.0 | 16.0 | 3.0 | 4.0 |
| L | 38 | 38 | 38 | 38 | 38 | 38 | 38 |
Miniature Burrs: Large Heads ØB 4.0~6.0mm
ØD 3mm Shank Diameter / 39~51Mm Overall Length
 |
|||||||
| Model No. | SA-52M SB-52M |
SA-53M SB-53M |
SC-52M | SC-53M | SD-52M | SD-53M | SE-53M |
| ØD | 4 | 5 | 4 | 5 | 4 | 5 | 5 |
| T | 13 | 13 | 13 | 13 | 4 | 5 | 7.1 |
| L | 39 | 39 | 39 | 39 | 39 | 39 | 39 |
 |
||||||
| Model No. | SF-53M | SG-53M | SH-53M | SL-53M | SM-53M | SN-53M |
| ØD | 5 | 5 | 5 | 5 | 5 | 5 |
| T | 13 | 13 | 13 | 13 | 13 | 6 |
| L | 39 | 39 | 39 | 39 | 39 | 39 |
 |
|||||
| Model No. | SA-51M | SA-51M/EC | SB-51M | SC-51M | SD-51M |
| ØD | 6 | 6 | 6 | 6 | 6 |
| T | 12 | 12 | 4.7 | 12 | 6 |
| L | 51 | 51 | 51 | 51 | 51 |
 |
|||||
| Model No. | SE-51M | SF-51M | SG-51M | SM-51M | SN-51M |
| ØD | 6 | 6 | 6 | 6 | 6 |
| T | 9.5 | 12 | 12 | 12 | 6 |
| L | 51 | 51 | 51 | 51 | 51 |
Note- ØB:Cutting Diameter T:Length Of Cut ØD:Shank Diameter L:Overall Length